Archive | December 2014

7 Big Mistakes To Avoid In Residential Construction

As any construction project involves a huge sum of money, it should be carried out with careful planning and optimum resource management. For many people, building their own house is once-in-a-lifetime activity as they invest their entire savings in constructing their dream home. Though people take all preventive measures, but there are lots of things that if done wrong can make your house not only uncomfortable, but downright unhealthy. Let’s take a look at 7 big mistakes that must be avoided in any residential construction.

  1. Poor space planning

Unless you have plans to build a very large home, space planning and design is extremely crucial. Proper storage is necessary, but pay attention to where you place your storage space. Does the master bedroom really need an oversized walk-in closet when the space could be used for another bedroom or master bath? After finalizing the building layout, decide on the space for garden. Do keep the parking space in mind while preparing layout. Try to make the best use of every single inch in your house.

  1. Under-utilized rooms

The addition of a playroom, game room or common room sounds exciting, but only plan to build a room that will actually get used. For example, there is no use of a separate home gym where the treadmill is used for drying clothes. In many homes, often an unused room becomes a dumping ground to place those things that never get used. If you plan on adding a spare room, make sure that it is a room that can transition well from one type to the next.

  1. Inferior quality construction material

If you’re really serious about your home building, never ever compromise on the quality of construction material as they are most important elements of any structure. A large number of people choose inferior quality material to save on cost without understanding the fact that this will actually reduce their building life.

  1. Choosing the wrong contractor

Using contractors that aren’t bonded and insured puts you at risk if anything goes wrong with the job and in case the contractor doesn’t fulfill his end of the bargain. Depending on where you live and what sort of work you’re doing, you may need to make sure your contractor is licensed, too. A good contractor will also be willing to work with you to stay within your budget by going over the proposal to see where you can cut back.

  1. Doing it yourself

There are several parts of renovation that homeowners can choose to do to get the total cost of the project down. However, when you’re planning to do things yourself, just make sure you have a very clear idea of what’s involved before you take it on.Doing it yourself is good; just make sure you know what you’re getting yourself into before you take on construction tasks. You don’t want to end up staring at unpainted wood and kicking yourself!

  1. Afraid of asking

When you choose to build your new home, try to get answers for all your queries. Whether it is related to choosing the best kitchen countertops or flooring, clearing your doubts and concerns is always helpful. Make sure to monitor the work at your end and never hesitate in asking questions to the contractors as it is your home.

  1. Poor Communication

Misunderstandings between you and your architect or contractor can cost you money or leave you unsatisfied with parts of the project. This is another area where you might start feeling like you’re over-doing it with the questions and clarifications, but your architect and contractor aren’t mind readers. It will always better off clarifying any questions you may have before work gets started, so there won’t be confusion once you break ground.


Disaster Management and the importance of TMT bars in construction

Before we start establishing a connection between disaster management and TMT bars, it would be great to first understand what a disaster is and how it affects us. According to Wikipedia, a disaster is a serious disruption of the functioning of a community or a society involving widespread human, material, economic or environmental losses and impact, which exceeds the ability of the affected community or society to cope using its own resources.


Now it’s notable that there are primarily two types of disasters– nature and man-made. Natural disasters are caused due to earthquakes, floods, cyclones, tsunamis and result in huge loss of human and animal lives while man-made disasters are caused due to certain human activities. They also cause damage to housing and habitat.

Although buildings manufactured these days are built in such a way to handle moderate earthquakes and cyclones, but still faulty design and the use of poor quality building materials are primarily responsible for the loss occurred.

To ensure best protection from natural disasters, it is suggested to prepare in advance, as they say prevention is better than cure. This can be done by constructing highly disaster resistant structures that can withstand tough natural disasters such as cyclones, hurricanes and earthquakes. Disaster resistant construction practices are as crucial as disaster resistant structural designs. Besides, the methodology for construction should also be designed for disaster resistance. There should have proper implementation of the structural details so as to let the structure behave as envisaged.

Over the past few years, the evolution of various building materials has helped construction engineers build disaster-resistant structures. One of these products is Thermo Mechanically Treated reinforced bars generally called TMT rebars that are integral to any construction project today. Therefore, it becomes imperative for builders and developers to use high quality TMT rebars to build a strong structure.

The TMT rebars manufactured by primary steel manufacturers using highly advanced technologies like HYQST exhibit high strength, high ductility and bendability and high weldability surpassing the requirements of Fe500D, 550D and 600CRS rebars set by BIS, thus making them a trusted and safe ingredient to a solid building structure.

A strong foundation is the key to a solid building structure. It is always better to prepare in advance for an unexpected disaster by building sturdy structures. Happy Building!

Next-generation products & techniques for faster construction

When it comes to kick-off a construction project, the very first thing people ask “When will this project get completed? There is a perception in minds that construction projects take months and even years to complete and to some extent this is quite true. But with the evolution of latest construction products & techniques, building & construction at a fast pace is very much feasible and practical

Recent advancements in the construction field have resulted into the development of next-generation products & techniques that are not only easy to implement but ensure great time and cost savings to the developers and builders. For example, there is welded wire mesh, Speedfloor, and pre-fabricated structures that are rapidly changing the dynamics of construction industry.

Readymade Welded Wire Mesh

Today is the generation of readymade steel products and welded wire mesh is one such product which is highly efficient, resulting into faster construction. Typically it is a kind of processed steel product that consists of rebars welded together to form a grid pattern.

The use of readymade welded wire mesh at construction sites has made construction much faster due to the elimination of various time-consuming activities such as cutting, marking and spacing of bars and binding of wires to the bars. At the outset, it provides a practical and easy solution for reinforcing slabs on ground whilst reducing wastage and scrap.


It is a completely innovative and revolutionary construction technique. The Speedfloor is a lightweight suspended concrete floor system that is incredibly quick and easy to install. Today, a large number of builders and developers across the world use this technique which has eliminated the outdated conventional flooring system which tends to be heavily complex.

Speedfloor is great for the construction of multi-storey buildings and car parking. The technique behind this innovation is an especially roll-formed, galvanised steel joist that offers all the benefits of open–webbed truss system.

Pre-fabricated Structures

Have you ever wondered why flyovers and metro bridges get constructed so fast? The secret behind them are pre-fabricated structures that are not only easy to install but reduce overall construction cost considerably.

Over the past few years, there have been considerable improvements in pre-fabricated structures that have become economical, efficient, and environment-friendly. Compared with traditional construction, prefabricated buildings cost less because a factory does up to 90% of the building before it ever reaches your site. Time is money, so getting your building up and running quickly is of utmost importance.

Time and cost and two crucial aspects in any construction project and these revolutionary construction products & technologies have given new dimensions to the construction industry.